Looking for the history file for CIMCO V8?
============================================================================== CIMCO DNC-Max V7 History ============================================================================== ============================================================================== NOTICE: Valid maintenance is required to install this download! ============================================================================== Changes made to CIMCO DNC-Max version 7.55.58 ================================================================ 20/05/16 == MDC-Max Changes: ================ - Web Client: Fixed error in backdating where wrong machine number was used. Changes made to CIMCO DNC-Max version 7.55.57 ================================================================ 20/05/16 == MDC-Max Changes: ================ - MDC Web Client now supports backdating. - Fixed issue with empty error messages during MDC first run. Changes made to CIMCO DNC-Max version 7.55.56 ================================================================ 29/04/16 == MDC-Max Changes: ================ - Fixed issue with inconsistency of MDC cache. - Fixed issue with daylight saving time. - Fixed canceling of running report. Changes made to CIMCO DNC-Max version 7.55.55 ================================================================ 12/04/16 == - Updated German translation. - Added field in machine file to change FOCAS communication port. [NETMON] -> FOCASPORT. Default is 8193. NC-Base Changes: ================ - The "Clear" button in the search panel now correctly clears machine selection. - File notes are now visible for programs in the import queue. - Fixed crash when renaming associated files. Changes made to CIMCO DNC-Max version 7.55.54 ================================================================ 05/04/16 == MDC-Max Changes: ================ - Fixed problem with operator screen layout. Changes made to CIMCO DNC-Max version 7.55.53 ================================================================ 30/03/16 == MDC-Max Changes: ================ - HTML reports converted to PDF using wkhtmltopdf.exe when it is installed in CIMCO\MDCMax\Sys - Fixed export of timeline to Excel - Setup sheet Machine/Groups moved to Report Setup tab - Added backward compatibility for XML export (New XML Setup sheet in Report Setup tab) - Added a new MDC protocol for NetLink (based on libnodave) – extended features - Added charts types in Report Setup - Removed switching between pie chart and bar chart (in some cases incompatible presentation of data) - Fixed live pie charts - Fixed last selected report in Report Setup tab - Fixed last selected screen in Live Setup tab Changes made to CIMCO DNC-Max version 7.55.52 ================================================================ 23/03/16 == - Network Protocol: Fixed issue when sending local file using rename trigger. NC-Base Changes: ================ - Added the option to keep status' from auto updating when program file is modified. Changes made to CIMCO DNC-Max version 7.55.51 ================================================================ 14/03/16 == - Network Protocol: When sending files, it is now possible to rename the file, using a trigger, and replace the triggered part with user defined input. Can be found under Advanced->Protocol NC-Base Changes =============== - File notes information is now stored so previous file notes can still be seen. MDC-Max Changes: ================ - fixed problem with timeline that doesn’t refresh when slide show is running.  Changes made to CIMCO DNC-Max version 7.55.50 ================================================================ 26/02/16 == - Updated portuguese translation. - Fixed issue when auto receiving a directory with main program file and associated files while using import queue. MDC-Max Webclient: ================== - Fix bug where popup screens may popup multiple times - Respect setting "Auto close subscreen when button pushed" Changes made to CIMCO DNC-Max version 7.55.49 ================================================================ 18/02/16 == - Editor changes. Changes made to CIMCO DNC-Max version 7.55.48 ================================================================ 15/02/16 == - FTP Server port: Fixed issue with "CWD .." command. Now handled as "CDUP". - Fixed error with auto receiving associated programs not being able to find main program. - When keeping NC-Base directory when sending files the $NCBASEDIR variable is automatically used now. Before the $DATA was used. MDC-Max Changes: ================ - Fixed incorrect encoding format in exported XML file in MDC client UTF-8 -> ISO-8859-1. - Fixed automatic events in back-dating engine. - Added time line legend to HTML report. - Fixed problem with printing of HTML reports Changes made to CIMCO DNC-Max version 7.55.45 ================================================================ 28/01/16 == - Updated Finnish translations. - Network Protocol: Fixed issue where auto generated report was deleted when any changed was detected by directory monitor. - Serial Protocol port: Fixed crash when trying to export received program with no name. - Terminal Port: If monitor message is received but is not a match for the defined messages in the DNC-Max server, the message is ignored. Changes made to CIMCO DNC-Max version 7.55.44 ================================================================ 19/01/16 == - Removed Netviewer client from install. No longer supported by Cisco. Changes made to CIMCO DNC-Max version 7.55.43 ================================================================ 15/01/16 == - Fixed error in advanced triggers where the start of line anchor could trigger immediately after a previous match. Auto import: Other file prefix length has been changed to use advanced trigger. If a file matches the advanced trigger, and a file in the database matches the same trigger with same output, the file will be associated to the database file. Old installations will automatically use an advanced trigger with same behavior as before version 7.55.43. Changes made to CIMCO DNC-Max version 7.55.42 ================================================================ 15/01/16 == - Updated Finnish translations. - Serial Protocol: Fixed crash when using "compare report" in generic serial protocol. - Network Protocol: It is now possible to send associated files before main file when doing auto receive. Associated files will be left in directory until a main file is received. Changes made to CIMCO DNC-Max version 7.55.41 ================================================================ 05/01/16 == - Editor Updates. Changes made to CIMCO DNC-Max version 7.55.40 ================================================================ 18/12/15 == - Editor Updates. Changes made to CIMCO DNC-Max version 7.55.39 ================================================================ 09/12/15 == - Teamviewer client updated to version 11. - fixed problem with delete of a template port in DB when a new port was added and Cancel button was pushed. - NCBase: fixed problem with restore of programs in import queue from backup when the ncbase root directory was pointed to a different directory then the original stored in the backup. MDC-Max Changes =============== - Fixed problem with clear condition like TIME[ISDAYSTART] on timeline -> it cleared the timer in last status on timeline - Web Client: Fixed formatting of many time durations. Changes made to CIMCO DNC-Max version 7.55.38 ================================================================ 27/11/15 == - Updated German and Finish translations. Changes made to CIMCO DNC-Max version 7.55.37 ================================================================ 25/11/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.55.36 ================================================================ 18/11/15 == - Updated Chinese translations. - Ftp server: FileZilla interface updated. Changes made to CIMCO DNC-Max version 7.55.35 ================================================================ 13/11/15 == - Auto import feature can now associate files to main program using sub directory structure. The main program will be the first file found in the directory. This feature is enabled when "Keep directory structure" and "Associated files in the same directory" is checked. - Split window: It is now possible to configure PC and CNC side allowed actions separately. Changes made to CIMCO DNC-Max version 7.55.34 ================================================================ 04/11/15 == - FTP Server: Fixed problem when using absolute path. Changes made to CIMCO DNC-Max version 7.55.33 ================================================================ 27/10/15 == - Editor updates. - Network protocol supports now subfolders for error file. MDC-Max Changes =============== - Timeline legend. - State duration marks in timeline. - Variable height of timeline. - Timeline export to pie charts. - Print support for pie charts. - Fixed problem with automatic events stopped after DNC server restart. - Added expression $COLUMNSUMHMS in machine column header for pie charts. - Added option to open the timeline when the MDC Client starts. - Added state sound notification for the Operator Screen. Changes made to CIMCO DNC-Max version 7.55.32 ================================================================ 22/10/15 == - Editor updates. - German translation updated. - Split Window: Fixed issue with "Merge Files". - Added new optional backup behavior when direcotyr monitor updates nc-base. This allows the directory monitor to trigger new version number in the nc-base based on backup. - Fixed error in Handheld terminal Bar code dialog. Changes made to CIMCO DNC-Max version 7.55.31 ================================================================ 14/10/15 == - Editor updates. - File Operations can now delete files based on their extension. This feature is found in the File Operations sheet. Changes made to CIMCO DNC-Max version 7.55.30 ================================================================ 13/10/15 == - Updated Korean translations. - Send File dialog: Fixed issue when not logged in as admin user. - Fixed problem with web clients when setting DNC-Max server network adapter to ip 0.0.0.0 - MDC Web client: Fixed issue when using custom colors. Changes made to CIMCO DNC-Max version 7.55.29 ================================================================ 06/10/15 == - Editor updates. - Network Protocol: FTP Synchronization now also works when the "local" path is a UNC path and will not report connection errors from the passive synchronization when the remote server is not online. Changes made to CIMCO DNC-Max version 7.55.28 ================================================================ 29/09/15 == - DNC-Max ignores FTP sending when sending Remote Requested file and "Send File" or "Synchronize FTP Directory with $INCOMING" is enabled. - Rename from main network sheet no longer applies if Send File is disabled. - Fixed configuration dialog for ioLogik device. Changes made to CIMCO DNC-Max version 7.55.27 ================================================================ 21/09/15 == - Editor updates. - Standard Serial Protocol: Fixed issue with receiving files larger than 16KB. MDC-Max Changes =============== - Improved MDC-Max web client performance. Changes made to CIMCO DNC-Max version 7.55.26 ================================================================ 16/09/15 == - Standard Serial Protocol: Fixed not being able to resend local file. MDC-Max Changes =============== - Fixed memory issue for MDC-Max. Changes made to CIMCO DNC-Max version 7.55.25 ================================================================ 11/09/15 == - Editor updates. NC-Base Changes =============== - Fixed issue with the "Edit file notes" functionality in NC-Base. MDC-Max Changes =============== - extended MDC automatic events/alerts with 8 fields which can realtime evaluate MDC expressions. - MDC alerts/events can be exported to OEMLink. - Added reading work zero offset (G54-G59) from Fanuc controllers in Focas protocol. Changes made to CIMCO DNC-Max version 7.55.24 ================================================================ 03/09/15 == - Fixed problem with auto receive execute would not pass static arguments to command line. - Split-window: Fixed error where CNC-side sorting would forget chosen sort method. NC-Base Changes =============== - Fixed error when previewing .rtf file would cause preview window to be stuck on the .rtf file. MDC-Max Changes =============== - Added reading overrides (feed, rapid, spindle) in Focas protocol. - Added reading PMC variables from Fanuc controller in Focas protocol. - NETLink protocol optimization. Changes made to CIMCO DNC-Max version 7.55.23 ================================================================ 28/08/15 == - Creating folder on CNC using LSV2 has been improved. NC-Base Changes =============== - Fixed error with program format duplicating last 2 characters in line. Changes made to CIMCO DNC-Max version 7.55.22 ================================================================ 17/08/15 == - Fixed problem with Auto Receive execute not passing all arguments to command-line. - Auto Receive/Remote Request Execute can now pass file without path as argument to command-line. A new checkbox has been added to execute configuration. MDC-Max Changes =============== - Fixed problem when saving timer group configuration. NC-Base Changes =============== - Fixed error where purging file from NC-Base would leave file on hard drive. - Fixed problem with program format missing new lines. Changes made to CIMCO DNC-Max version 7.55.21 ================================================================ 10/08/15 == - Split-window can now sort files and directories on the CNC side. - Editor updates. Changes made to CIMCO DNC-Max version 7.55.20 ================================================================ 05/08/15 == - Editor updates. - New serial port for Woyda machines. - DNC-MaxCtrl can now send entire folders to a CNC. To send the contents of a folder use the argument -"sf". The file argument in the command line must end in a slash to trigger folder send. Use the argument "-kf" to create the a folder with the same name on the CNC and send the files to that folder. MDC-Max Changes =============== - Fixed reload of live configuration when engine configuration is changed. NC-Base Changes =============== - Fixed crash when switching previews in editor with some file formats. Changes made to CIMCO DNC-Max version 7.55.19 ================================================================ 03/08/15 == - Fixed translation in IO logic configuration sheet. - Editor updates. MDC-Max Changes =============== - Fixed reload live configuration when engine configuration is changed. - Added support for reading Feed/Rapid/Spindle overrides from fanuc controllers via focas. - Added restart netlink adapter when gets ready. - Fixed pie charts in html report. - Fixed DB integrity check dialog. Changes made to CIMCO DNC-Max version 7.55.18 ================================================================ 28/07/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.55.17 ================================================================ 20/07/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.55.16 ================================================================ 17/07/15 == NC-Base Changes =============== - It is now possible when accepting a program on the import queue to "Accept to multiple machines". This will accept the queued file as usual and immediately copy it to overwrite other programs with identical names in other machines of the user's choice. This option is useful if one program file is used on several similar machines. Changes made to CIMCO DNC-Max version 7.55.15 ================================================================ 03/07/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.55.14 ================================================================ 02/07/15 == - Updated German translation. Changes made to CIMCO DNC-Max version 7.55.13 ================================================================ 26/06/15 == - Updated German translation. - Editor updates. NC-Base Changes =============== - Fixed problem in Server Settings: "Disable customer info" and "Disable project", projects can now enabled without having customers. Changes made to CIMCO DNC-Max version 7.55.12 ================================================================ 24/06/15 == - Serial protocol: Fixed not being able to disable send translator when using "Send File Advanced". - Fixed issue with sending many large local files to DNC-Max server. Changes made to CIMCO DNC-Max version 7.55.11 ================================================================ 22/06/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.55.10 ================================================================ 17/06/15 == - Fixed issue with split window when split window opened in a network path. - Fixed issue with split window not refreshing CNC directory after some operations. - FTP Server: Added new Mazak FTP Server behavior. This has Mazak compatibility enabled as default, and has some special command handling that should make it easier for Mazak users. Mazak compatibility is still available for other FTP Server behaviours. - FTP Server: Fixed issue with FTP REST command. - FTP Server: Fixed issue with remembering last entered path. - Editor updates. Changes made to CIMCO DNC-Max version 7.55.09 ================================================================ 09/06/15 == - Updated German translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.55.08 ================================================================ 04/06/15 == - Mazak protocol: Changed maximum comment length for MAZAK MPLUS and TPLUS to 32, and M64 to 48 - Auto receive: When "Update fields after receiving" and the setting in NC-Base "Update program fields from associated files" is checked, associated files will be scanned. - Auto import: When "Use folder name as program name" and the setting in NC-Base "Update program fields from associated files" is checked, associated files will be scanned. - Editor updates. NC-Base Changes =============== - Added option "Update program fields from associated files", used by Program Format to enable scanning of associated files. Changes made to CIMCO DNC-Max version 7.55.07 ================================================================ 02/06/15 == - FTP Server (FileZilla, and Default): Fixed issue with NLST command and CWD * Changes made to CIMCO DNC-Max version 7.55.06 ================================================================ 28/05/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.55.05 ================================================================ 26/05/15 == - Updated Network Protocol: Split Window now also shows the directory when presenting error for files that cannot be transferred. - Editor updates. Changes made to CIMCO DNC-Max version 7.55.04 ================================================================ 20/05/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.55.03 ================================================================ 18/05/15 == - Fixed issue where default files extension for the send/receive window was filled with garbled text. - Updated Portuguese translation. Changes made to CIMCO DNC-Max version 7.55.02 ================================================================ 15/05/15 == - Editor updates. NC-Base Changes =============== - Added two command line arguments: /ncbaseminimal - Opens NC-Base in minimal mode. /ncbasesuperminimal - Opens NC-Base in super minimal mode. Changes made to CIMCO DNC-Max version 7.55.01 ================================================================ 08/05/15 == - FTP Server: Fixed problems with current client directory changing for all connected clients. - Updated Network Protocol: The configuration sheet Advanced->Other has been replaced by two new sheets, Advanced->Protocol and Advanced->Split Window. - Updated Network Protocol: The "delete" button in the split window can now be disabled by unchecking "Allow deletion of files and folders" in Advanced->Split Window - Updated Network Protocol: A set of default file extensions can be set for the split window under Advanced->Split Window. - Editor updates. MDC-Max Changes =============== - Fixed issue where MDC-Max would crash if color selection in Graph Report Setup was attempted and Live Setup had not been opened. Changes made to CIMCO DNC-Max version 7.55.00 ================================================================ 05/05/15 == - Updated Network Protocol: Split window now informs user if files cannot be sent, deleted or renamed. - New telnet command "REQUESTFILE" - call remote request on dnc port. - New parameter in DNCMaxCtrl app: -r = Remote request. - Updated Portuguese translation. - Editor updates. MDC-Max Changes =============== - Split MDC configuration allowing changes in reports and live/operator screens without recalculation. - Export of time line to XML. NC-Base Changes =============== - Permission: "Import queue programs read-only" now applies to both the program on the import queue and the current program. Changes made to CIMCO DNC-Max version 7.50.23 ================================================================ 30/04/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.50.22 ================================================================ 29/04/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.50.21 ================================================================ 24/04/15 == - FTP Server: It is now possible to set a timeout period for FTP clients connecting to DNC-Max FTP Server. - Editor updates. NC-Base Changes =============== - Added "Notify on programs with import conflict" and read-only permission check to the button: "View imported file". Only showing file name not full path of imported file with conflict. - Added "Awaiting approval" to imported files when double clicking on them. MDC-Max Web Client Changes ========================== - Improved setup excel tab: Disable check box when report is not type of time line. - Added a new option for time line export: Sum states on time line. Changes made to CIMCO DNC-Max version 7.50.20 ================================================================ 21/04/15 == - Directory Monitor: Fixed problem with setting seconds for directory scan interval. - FTP Server: Fixed problem with sockets sometimes not being closed correctly by FTP Server. - Updated Network Protocol: Split window can now list directories using LSV2 for TNC640 machines. Empty files (files with size 0) will be regarded as directories for TNC640 machines. - Editor updates. Changes made to CIMCO DNC-Max version 7.50.19 ================================================================ 17/04/15 == - Minor fixes to UNC Directory Login configuration interface. - Network protocol: Fixed error where configuration of ignored directories for auto receive set was lost. - Editor updates. NC-Base Changes =============== - Added permission: "Import queue programs read-only". - Added option: "Notify on programs with import conflict" this notifies the user and changes the background color of the editor window when they open a import file or a file with a import waiting approval. Changes made to CIMCO DNC-Max version 7.50.18 ================================================================ 16/04/15 == - The setting "Do not place received files on the import queue" in Directory Monitor and Generic Serial ports' Auto Receive set specific NC-Base settings has been reworked to make files handled by the autoreceive set behave exactly as if the setting "Place files on the import queue" in the port NCBase settings was not enabled. - Updated network protocol: Receiving files in split window can now chosen to be placed in the directory shown in the split window when NC-Base export is enabled. - Editor updates. MDC-Max Web Client Changes ========================== - Mitigate issue when ghost live screens exist. Changes made to CIMCO DNC-Max version 7.50.17 ================================================================ 13/04/15 == - Updated Network Protocol: Send File advanced can now send and receive folders using FTP and LSV2 protocol. Can receive folders using FOCAS protocol, and can send folders on FOCAS machines that allows directory creation. - Updated Network Protocol: Send File advanced can now rename file and folders on pc side and on cnc side using FTP protocol. Using LSV2 protocol, files can be renamed on cnc side. - Updated Auto Import feature: Auto import can now import folders put into the import directory, and use the folder name as the program name in NC-Base. - Updated sending from NC-Base: When sending from the NC-Base, it is now possible to send entire folders using the FTP,LSV2 or FOCAS protocols. If the files in the NC-Base is located in a folder, they will be send to a folder with the same name on the cnc. - Editor updates. MDC-Max Changes =============== - Disable calculation on Excel side when the table is exported to Excel, this makes export to the Excel faster. Changes made to CIMCO DNC-Max version 7.50.16 ================================================================ 10/04/15 == - Updated French translation. - DNC-Max Client Plugin for Editor now knows if it is licensed using the License Server. - FTP Synchronization: Files transferred from ftp to local machine are now added to FTPSync's cache of local files. - Editor updates. MDC-Max Changes =============== - Only RTS output in the HHT port can be specified like output. Changes made to CIMCO DNC-Max version 7.50.15 ================================================================ 09/04/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.50.14 ================================================================ 07/04/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.50.13 ================================================================ 01/04/15 == - Editor updates. MDC-Max Changes =============== - Timer group settings will once again apply to all timers. - The User defined colors in the Color picker will now persist between MDC-Max launches. Changes made to CIMCO DNC-Max version 7.50.12 ================================================================ 31/03/15 == MDC-Max Changes =============== - Timeline can be exported to excel as raw data. - Recalculation start can be set to any hour of the previous day (Recalculation is alwaystime for last 24 hours) - Events of type DB can write values to MSGVAR1 - MSGVAR8 (Supported $JOB, $PROGRAM, $OPERATOR, ...) Changes made to CIMCO DNC-Max version 7.50.11 ================================================================ 30/03/15 == - Fixed problem with checkboxes in UNC Directories interface not loading properly from machine file. Changes made to CIMCO DNC-Max version 7.50.10 ================================================================ 27/03/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.50.09 ================================================================ 25/03/15 == - Updated network protocol: When sending file, using LSV2, FOCAS or FTP machine protocol with NC-Base link enabled, the file can be renamed using a database field chosen by the user. - Editor updates. NC-Base Changes =============== - Added option to make fields required for sending to a DNC-Max port. Changes made to CIMCO DNC-Max version 7.50.08 ================================================================ 18/03/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.50.07 ================================================================ 17/03/15 == - Updated Network protocol: Send file advanced for ftp client protocol can now create a new folder on the CNC/FTP server. - Editor updates. MDC-Max Changes =============== - Added new configuration sheet, "State/indicator presets" which can be used to predefine settings for the sheets: * "Status Screens: States" * "Status Screens: Lights / Indicators" * "Operator Screens: Show State" Any number of predefinitions can be set and then chosen in any of the above mentioned sheets. Settings previously set in any of the sheets "Status Screens: States", "Status Screens: Lights / Indicators" and "Operator Screens: Show State" can easily be defined as a predefined settings set to be used elsewhere. If a set already exists which is identical to what is being exported, the user is asked whether to use that set instead of adding a new duplicate version. Changes made to CIMCO DNC-Max version 7.50.06 ================================================================ 16/03/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.50.05 ================================================================ 13/03/15 == - Updated Network protocol: Send file advanced for LSV2 machine protocol can now create a new folder on the CNC. - Updated Serial protocol: Can now automatically restart DNC port after transmit operation or after completed remote request. MDC-Max Changes =============== - Added support for storing of Excel Templates in database. - Added option for switch Row/Column. Changes made to CIMCO DNC-Max version 7.50.04 ================================================================ 12/03/15 == - Editor updates.  Changes made to CIMCO DNC-Max version 7.50.03 ================================================================ 11/03/15 == - Updated French and Danish translation. - Fixed problem with auto receive in Serial port. MDC-Max Changes =============== - Updated MDC client: original “System setup" was split into "Client options" and "System setup" Avoid recalculation when Client settings were changed. - Updated MDC client: Fixed problem with start time in Backdating window. - Updated MDC client: System setup moved to a window tab. - Updated MDC client: Fixed problem with log off. - Fixed problem with "Calculating..." when traditional engine is used. - Excel is disabled when Backdating engine is used. MDC-Max Web Client Changes ========================== - Add compatibility with new operator screen button features. - Fix improper display of TIME, DATE and DATETIME fields. Changes made to CIMCO DNC-Max version 7.50.02 ================================================================ 10/03/15 == - Updated Polish translation. - Updated Directory Monitor: Auto receive set can now ignore directories set in AutoRecv/RemReq configuration window. The ignored directories is chosen in the auto receive set ignore directory window. - Updated Directory Monitor/Standart Serial: Auto receive can now execute an external program after receiving a file. Parameters to the external program can be specified either in the file itself or by writing a command line string in the auto receive execute configuration window. - Updated LSV-2 TCP/IP network protocol: It can now send and receive directories to and from a heidenhain cnc using the split window (send file advanced). - When placing a file received using auto receive on the nc base import queue, the file will no longer be deleted before being put on the queue. - If the "Delete auto received files from the monitoring directory" is unchecked, the NC Base will no longer delete the file when it is placed on the import queue. Changes made to CIMCO DNC-Max version 7.50.01 ================================================================ 06/03/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.20.10 ================================================================ 05/03/15 == - Updated Fanuc FOCAS: Added feature for creating and deleting folders. - Updated Fanuc FOCAS: Access to CNC_MEM and DATA_SRV. MDC-Max Changes =============== - Fixed evaluating of Excel export name. - Fixed scroll in backdating window when upload was pushed. - Added feature for searching backdated messages based on schedule. - Fixed multiple chart table - showed only one column. - Added log when a new MDC configuration is stored in DB. Changes made to CIMCO DNC-Max version 7.20.09 ================================================================ 19/02/15 == - Updated FTP Server: Expanded FileZilla engine response behavior. - Updated Finnish translation. - Editor updates. MDC-Max Changes =============== - Added a new MDC server engine supporting backdating and single MDC port recalculation. Changes made to CIMCO DNC-Max version 7.20.08 ================================================================ 17/02/15 == - UNC Login errors now give a description. - Updated DNC-Max and MDC-Max Web clients: IP address and port settings are now read from DNC-Max server configuration. The web clients will now work if the IP address is changed under "server configuration" -> "network setting" -> "use network adapter". - Updated FTP Server port: It is now possible to adjust the FTP Server engine 3 types of engines are available: * "Default" Behaves as the normal DNC-Max FTP Server. * "FileZilla" Emulates FileZilla server. * "Lenient" Will reply with a success if the outcome of a request is the same even if it has failed (for example creating a directory that already exists). - Editor updates. Changes made to CIMCO DNC-Max version 7.20.07 ================================================================ 11/02/15 == - Editor updates. NC-Base Changes =============== - Fixed problem where the Mazak preview window in NC-Base client some times becomes blank. MDC-Max Changes =============== - The first timer in the Timer List will no longer reset Event to default when the System Configuration Window is opened. - Fixed write configuration for order view when order view was not activated. Changes made to CIMCO DNC-Max version 7.20.06 ================================================================ 06/02/15 == - Updated Korean translation. - Editor updates. MDC-Max Changes =============== - Invalid timer settings should no longer cause issues with migration of config format for timer settings pre-7.20.05 to post-7.20.05. Changes made to CIMCO DNC-Max version 7.20.05 ================================================================ 05/02/15 == MDC-Max Changes =============== - Fixed backward compatibility for the MDC configuration. - Added new feature: Timer Groups. Grouping timers together will allow you to set the timers within a group to be mutually exclusive. Making timers mutually exclusive will add to the end of each timer's stop conditions the start conditions of every other timer in the group. It is also possible to set stop conditions that apply to every timer in the group. This new feature is available as a sub-item to Timers in the MDC-Max System Setup. The option of setting a custom color for items in Live Screens and Operator Screens which were previously limited to specific colors has been added. Changes made to CIMCO DNC-Max version 7.20.04 ================================================================ 03/02/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.20.03 ================================================================ 30/01/15 == - Editor updates. MDC-Max Changes =============== - MT-Connect added ESTOPON/ESTOPOFF messages. - Restart MT-Connect agent from the DNC Admin. - Added custom SQL query for the Order View. Changes made to CIMCO DNC-Max version 7.20.02 ================================================================ 29/01/15 == - Editor updates. MDC-Max Changes =============== - Added backdating features. Changes made to CIMCO DNC-Max version 7.20.01 ================================================================ 26/01/15 == - Editor updates. MDC-Max Changes =============== - New skin. Changes made to CIMCO DNC-Max version 7.01.28 ================================================================ 21/01/15 == - Added UNC login support to DNC-Max ports. This feature is available as a sub-item to Directories under port configuration. - Fixed error in ftp server when trying to delete file from ftp client. Changes made to CIMCO DNC-Max version 7.01.27 ================================================================ 20/01/15 == - Editor updates. Changes made to CIMCO DNC-Max version 7.01.26 ================================================================ 19/01/15 == - Fixed problem with receiving MDC bar-codes when serial port does not have Autoreceive active. - Decreased wait time before force shut down of the DNC server. - Un-terminated threads are listed then in sys/system.log. - Added feature for wild char remote request for hand held terminal. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.25 ================================================================ 14/01/15 == - Updated French and Danish translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.24 ================================================================ 13/01/15 == - Editor updates. MDC-Max Changes =============== - MDC Client improve close tabs. Changes made to CIMCO DNC-Max version 7.01.23 ================================================================ 08/01/15 == - Updated FTP server * Fixed issue with some FTP clients using relative path in CWD command <CMD /path1/path2> * NLST command returns now list of files + folders (before only files). - Updated Korean and German translation. - Editor updates. MDC-Max Changes =============== - Added new feature Order-view that allows searching for job/orders. Changes made to CIMCO DNC-Max version 7.01.22 ================================================================ 18/12/14 == - Directory Monitor: Added option to merge sub-programs into main program when auto-receiving programs with associated sub-programs. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.21 ================================================================ 10/12/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.01.20 ================================================================ 05/12/14 == - Directory Monitor - Send file: Added new option "Clean directory before scanning", this deletes files in the directory older than the interval defined in "Delete files after". - Updated French translation. - Editor updates. NC-Base Changes =============== - Added option to "Save local" when saving programs in the editor with NC-Base. - Fixed problem with merging of 2 databases when there is more then 10000 programs. MDC-Max Changes =============== - Fixed problem with loosing MDC configuration when there is a problem with network connection. Changes made to CIMCO DNC-Max version 7.01.19 ================================================================ 26/11/14 == - 'Send all NCBase programs matching the request' now also works for Hand held Terminal requests in Directory Monitor protocol. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.18 ================================================================ 24/11/14 == - Editor updates. MDC-Max Changes =============== - Fixed problem with showing bubble on time line when the resolution is lower than 32bit. - Fixed MDC Outputs in hand held terminal. Changes made to CIMCO DNC-Max version 7.01.17 ================================================================ 17/11/14 == - Updated Chinese translation. - Editor updates. MDC-Max Changes =============== - Small fixes in MDC client event log. - Event log close improvements. Changes made to CIMCO DNC-Max version 7.01.16 ================================================================ 12/11/14 == - Directory Monitor: Added option to send all NC-Base entries that match when using Remote Requests with 'Advanced -> NC-Base field to match'. - Updated Chinese translation. - Editor updates. NC-Base Changes =============== - Fixed problem with wrong tool list used, when copying programs. Changes made to CIMCO DNC-Max version 7.01.15 ================================================================ 11/11/14 == - Updated Portuguese translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.14 ================================================================ 07/11/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.01.13 ================================================================ 05/11/14 == - Directory Monitor: Added drag and drop feature for split window. MDC-Max Changes =============== - Reports: customizable column titles for variables Machine, Operator, Program, Job NC-Base Changes =============== - Added new option: Open files without extension in editor. - Removed old setting where extensions in "Machine", "Extensions" was associated with the editor. - Fixed problem with Read only function in NCBase running on MSSQL. Changes made to CIMCO DNC-Max version 7.01.12 ================================================================ 30/10/14 == - Directory Monitor: Added option to delete files older than one second in send directory when sending a file. - Directory Monitor: Fixed crash when trying to connect to an unavailable server. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.11 ================================================================ 28/10/14 == - Fixed problem with missing licenses for Hand Held terminals and Machine Monitors. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.10 ================================================================ 27/10/14 == - Removed the change from 7.00.19: Program received by DNC is not added on import queue when it is the same. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.09 ================================================================ 22/10/14 == - Directory Monitor: Fixed problem with synchronizing FTP root directory. - Added option: Disable idle/stopped port, when starting unlicensed port. When this field is checked DNC-Max will automatically disable the first idle/stopped port it finds when the user starts a disabled port and there is no free licenses left, no action is taken if all licensed ports are in use. This option is intended for a single user environment. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.08 ================================================================ 17/10/14 == - Directory Monitor: Fixed problem with FTP transfers (split screen), and general improvements to FTP performance. - Directory Monitor: Synchronize FTP directory with $INCOMING now handles many error scenarios gracefully. - Updated Danish translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.07 ================================================================ 13/10/14 == MDC-Max Changes =============== - Added new type of graph: Log Graph, Log Graph is graphic representation of the Event Log. - MTConnect compatibility update. Changes made to CIMCO DNC-Max version 7.01.06 ================================================================ 09/10/14 == - Auto Receive: "Split Siemens .WPD files" now works with receive translators. MDC-Max Changes =============== - Protocol configurations updates. NC-Base Changes =============== - Added script to perform periodic backup: PeriodicBackup.bat Changes made to CIMCO DNC-Max version 7.01.05 ================================================================ 07/10/14 == - "Send unlocked programs only", "Send programs in database only" and "Only send files in request directories" is now available in both serial and network protocol. - Updated auto receive: It can now associate files of the same name to different programs in NC-Base provided they are placed in separate folders. MDC-Max Web Client Changes ========================== - Fix issue where live screen status gets stuck. - Fix inconsistency in ini parsing. Changes made to CIMCO DNC-Max version 7.01.04 ================================================================ 03/10/14 == - Added option to clean out NC-Base associated files when auto-receiving a program using a Directory monitor. This will effectively allow having a dynamic list of associated files and/or renaming associated files without having to manually delete the old files from NC-Base. This option is available under 'Auto receive -> Set: 'Name' -> NC-Base -> Delete NCBase associated files on receive'. Please backup files before activating this option. - Reworked 'Receive -> Advanced -> Enable multi file reception' in Serial protocols. When using this option, each remote request in the multi request file should now be handled in the same way as if it were made in a file on it's own. - Editor updates. Changes made to CIMCO DNC-Max version 7.01.03 ================================================================ 01/10/14 == - Editor updates. DNC-Max Web Client Changes ========================== - Add feature to toggle visibility of machines. - Fix error when certain file names use invalid encoding. - Fix error when reading drive information. Changes made to CIMCO DNC-Max version 7.01.02 ================================================================ 29/09/14 == - Added option to work with Siemens WPD folder in network monitor and auto receive when main program name does not match with folder name. - Editor updates. MDC-Max Changes =============== - Increased range limits of speeds and feeds in MDC monitor protocols from 140 to 200. - Added option for MySQL server to increase maximum allowed packet size, requires restart of database - Added option to adjust button font size on operator panel. - Added new feature for operator buttons which can execute a batch command after pressing them. NC-Base Changes =============== - Added a new optional feature to keep first version forever as a Master file. - Added support for new Tool list generator. Changes made to CIMCO DNC-Max version 7.01.01 ================================================================ 22/09/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.01.00 ================================================================ 19/09/14 == - Serial protocol: Added option to send all NC-Base entries that match, when using Remote Requests with 'Advanced -> NC-Base field to match'. MDC-Max Changes =============== - Fixed problem with freezing live screens. Changes made to CIMCO DNC-Max version 7.00.99 ================================================================ 18/09/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.98 ================================================================ 18/09/14 == NC-Base Changes =============== - Fixed problem with too few search results caused by "log content search" now it is only used when searcing using "All Fields". Changes made to CIMCO DNC-Max version 7.00.97 ================================================================ 16/09/14 == MDC-Max Changes =============== - Option to generate MDC event, when sub screen is opened. Changes made to CIMCO DNC-Max version 7.00.96 ================================================================ 12/09/14 == - Fixed bug where autoreceive success reports would be deleted almost immediately after being sent. - Changed the way reports for autoreceive success and remote request failures are defined when running a directory monitor setup, previously the autogenerated report filename was set individually for each autoreceive or remote request set. Now, the filename for autogenerated reports is set for the entire port under 'Advanced > Report success' and 'Advanced > Report failed request'. This filename can contain variables such as $RECVPRGNAME to allow for program specific report filenames. The field previously used to set filename for the individual sets can now instead be used to send a specific, pre-generated file to use as report for the specific Autoreceive or Remote request set. Please go through any Autoreceive or Remote request sets to make sure the desired method of error report is selected. - Added option to synchronize an FTP directory with a local directory, for use with directory monitor, this option is availabe under 'Advanced > Other' when 'FTP Client' is enabled under the same page. The synchronization interval is configured using "Scan interval" in "Directory Scan", Autoreceive and Remote Request, as well as subfolder synchronization are supported. - Updated Danish translation. - Editor updates. NC-Base Changes =============== - Added option to search log text when using "All Fields" in Advanced search it can be disabled using "Disable log content search". Changes made to CIMCO DNC-Max version 7.00.95 ================================================================ 05/09/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.94 ================================================================ 29/08/14 == - Updated Swedish and French translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.93 ================================================================ 25/08/14 == - Directory Monitor: Fixed problems with FTP Paths containing backslash. - Editor updates. MDC-Max Changes =============== - Increased maximum number of MDC clients to 512. Changes made to CIMCO DNC-Max version 7.00.92 ================================================================ 19/08/14 == - Updated Swedish translation. - Updated English and French NC-Base help files. MDC-Max Changes =============== - MTConnect protocol variable attributes for alarms. - Fixed issue with ordering of Machines in Tables/Graphs/Logs configuration. Changes made to CIMCO DNC-Max version 7.00.91 ================================================================ 15/08/14 == - Updated French translation. - Editor updates. MDC-Max Changes =============== - Optimized Netlink support. Changes made to CIMCO DNC-Max version 7.00.90 ================================================================ 12/08/14 == - Editor updates. NC-Base Changes =============== - Added option: "Use id number to avoid conflicting filenames" which only appends unique id when a conflict is detected on associated files. Changes made to CIMCO DNC-Max version 7.00.89 ================================================================ 11/08/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.88 ================================================================ 08/08/14 == - Editor updates. MDC-Max Changes =============== - Small fix for Heidenain MDC protocol. Changes made to CIMCO DNC-Max version 7.00.87 ================================================================ 06/08/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.86 ================================================================ 01/08/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.85 ================================================================ 29/07/14 == - Editor updates. MDC-Max Changes =============== - Added feature to prevent start of windows screen saver in full screen. Changes made to CIMCO DNC-Max version 7.00.84 ================================================================ 23/07/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.83 ================================================================ 23/07/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.82 ================================================================ 22/07/14 == - Added buttons "Select All" + "Select None" in DNC backup restore dialog. - Editor updates. MDC-Max Changes =============== - Fixed waiting for NETLink start-up. - Fixed reading active program on Heidehain TNC 430/426 - Added support to have an extra cycle time switching from high to low state and from low to high state - Fixed problem with time line because of auto-update during midnight. - Improved performance of time line live update. - Fixed MDC client -> dragged mouse move on standard graph. - Improved dialog selector to see longer MDC equations. - Fixes for losing of MDC configuration. Changes made to CIMCO DNC-Max version 7.00.81 ================================================================ 04/07/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.80 ================================================================ 30/06/14 == - Remote request: Added new option: Include NC-Base programs with extensions The specified extensions will be used to look up programs with same base name, requires NC-Base and Associated files set to: "Use NC-Base". Example: Requested NC-Base program "O1234" NC-Base contains two programs: O1234.MPF and O1234.SPF, if the field contains "MPF,SPF", both O1234.MPF and O1234.SPF will be send. This works similar to subprograms in NC-Base. MDC-Max Changes =============== - Fixed timer value TIMERLAST counting even if it is suspended. - Added vertical scroll with mouse on timeline. Changes made to CIMCO DNC-Max version 7.00.79 ================================================================ 25/06/14 == - Improved performace with MSSQL - Added new feature in Directory monitor auto receive: Update file modify time if files are identical. - Directory monitor Auto receive: Disabled "Save in $INCOMING" it is only implemented in serial protocol. - Editor updates. MDC-Max Changes =============== - Fixed MTConnect agent running multiple times. - Netlink feed rate / rapid feed updates. Changes made to CIMCO DNC-Max version 7.00.78 ================================================================ 20/06/14 == - Editor updates. MDC-Max Changes =============== - Added horizontal scroll using mouse move in time line. - Support generating reports for machine groups (MDC groups, NCBase groups, DNC groups) - Automatic update of time line when crossing midnight. - NETLink updates, MTConnect updates. Changes made to CIMCO DNC-Max version 7.00.77 ================================================================ 18/06/14 == - Editor updates. MDC-Max Changes =============== - Fixed problem with connecting multiple MDC-Max clients to DNC-Max server. Changes made to CIMCO DNC-Max version 7.00.76 ================================================================ 17/06/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.75 ================================================================ 16/06/14 == - Updated Finnish translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.74 ================================================================ 12/06/14 == - DNC-Max auto receive: Added option to recursively search the auto receive directory for the received filename and replace the first file found with the same name. - Editor updates. MDC-Max Changes =============== - Fixed issue with remapping of messages from MDC client. Changes made to CIMCO DNC-Max version 7.00.73 ================================================================ 10/06/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.72 ================================================================ 06/06/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.71 ================================================================ 05/06/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.70 ================================================================ 05/06/14 == - Editor updates. MDC-Max Changes =============== - Fixed issue with remapping and messages from buttons. - Fixed problem when input is given by bar-code reader. - Fixed feature for remapping messages: Now one message can be remapped into more messages if conditions are true. NC-Base Changes =============== - Added option: "Server Settings" > "Backup machine group changes" it logs each change to associations between machine groups and DNC-Max ports. - Maintenance: Added ability to restore association between machine groups and DNC-Max ports using the log, this can be used to recover from instances where DNC-Max changes port id's. Changes made to CIMCO DNC-Max version 7.00.69 ================================================================ 03/06/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.68 ================================================================ 30/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.67 ================================================================ 28/05/14 == - Editor updates. NC-Base Changes =============== - Added option to save using Sub-program extension, when using "Save As". - Added ability to change extension of files when creating new programs, the allowed extensions is taken from the Sub-program extension list. Changes made to CIMCO DNC-Max version 7.00.66 ================================================================ 27/05/14 == - Editor updates. - Updated French translation. MDC-Max Changes =============== - Added a filter for top predefined number of values showed in a graph. NC-Base Changes =============== - Added options to unlink or delete all DNC-Max ports in the NC-Base. Changes made to CIMCO DNC-Max version 7.00.65 ================================================================ 23/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.64 ================================================================ 22/05/14 == - Editor updates. MDC-Max Changes =============== - Speeded up of rebuild/calculation when MSSQL is used. Changes made to CIMCO DNC-Max version 7.00.63 ================================================================ 20/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.62 ================================================================ 20/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.61 ================================================================ 20/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.60 ================================================================ 19/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.59 ================================================================ 15/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.58 ================================================================ 14/05/14 == - Updated DNC-Max Web client. - Updated manifests to support: Vista, 7, 8, 8.1 - Editor updates. Changes made to CIMCO DNC-Max version 7.00.57 ================================================================ 12/05/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.56 ================================================================ 09/05/14 == - Network Protocol: Fixed FTP client. - Updated DNC-Max Web client. - Editor updates. MDC-Max Changes =============== - MTConnect: Added option for generating message "part count" only in AUTOMATIC mode. Changes made to CIMCO DNC-Max version 7.00.55 ================================================================ 05/05/14 == - Editor updates. NC-Base Changes =============== - Added option for a machine to share with more than 4 machine groups. Changes made to CIMCO DNC-Max version 7.00.54 ================================================================ 30/04/14 == - Updated German, French and Korean translation. - Editor updates. MDC-Max Changes =============== - Added parameter QUERYTIMEOUT solving issue with MSSQL when it contains lots of collected data. - Fixed hanging MDC client when report configuration is changed and live screen is not open. Changes made to CIMCO DNC-Max version 7.00.53 ================================================================ 23/04/14 == - Updated Finnish translation. - Network Protocol: Fixed translator in remote request. - Editor updates. MDC-Max Changes =============== - Fixed MDC hanging. Changes made to CIMCO DNC-Max version 7.00.52 ================================================================ 16/04/14 == - Editor updates. NC-Base Changes =============== - Renaming a program will give associated files unique names, and copy linked files if "Add id number to associated/other/picture filenames" is set. - Updated method of generating unique id when associating files if "Add id number to associated/other/picture filenames" is set. Changes made to CIMCO DNC-Max version 7.00.51 ================================================================ 15/04/14 == - Implemented passive mode for FTP server port. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.50 ================================================================ 11/04/14 == - Updated DNC-Max Web client. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.49 ================================================================ 10/04/14 == - Added feature for multiple scans when bar-code reader is connected to hand-held terminal - Added feature for programs received via split screen if export to NC-Base is active, programs are copied to the INCOMING folder first. - Improved speed of LSV2 protocol in split window. - Editor updates. MDC-Max Changes =============== - Added feature to accept environment variable for machine name in time line ($MCHVARTEXT1, $REPORTMACHINEGROUPMDC...) - Added support for a new firmware of NETLink Compact PRO. NC-Base Changes =============== - Fixed Open: Fixed problem with files always opening in editor. Changes made to CIMCO DNC-Max version 7.00.48 ================================================================ 07/04/14 == - Added support for waiting time in-between multiple scans can be done with a barcode reader. - Updated Polish translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.47 ================================================================ 02/04/14 == - Editor updates. NC-Base Changes =============== - Fixed Open: Open with editor if the extension matches the machine group extension, or the file and machine group extension are both empty. Changes made to CIMCO DNC-Max version 7.00.46 ================================================================ 31/03/14 == - Updated Czech, German and Japanese translation. - Added digital signature to programs, this improves support for windows. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.45 ================================================================ 25/03/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.44 ================================================================ 24/03/14 == - Editor updates. MDC-Max Changes =============== - Optimized memory usage of MDC client. Changes made to CIMCO DNC-Max version 7.00.43 ================================================================ 14/03/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.42 ================================================================ 12/03/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.41 ================================================================ 10/03/14 == - Fixed export to NC-Base for FTP protocol. - Editor updates. MDC-Max Changes =============== - Changed XML format of "Export To XML" this prevents invalid XML. Changes made to CIMCO DNC-Max version 7.00.40 ================================================================ 07/03/14 == - Editor updates. MDC-Max Changes =============== - New feature for IOLogic device: Detection of blinking signal. - Implemented support for IOLogic devices with password. Changes made to CIMCO DNC-Max version 7.00.39 ================================================================ 28/02/14 == - Fixed auto receive for network protocols (LSV2/FTP/FOCAS). - Fixed export on import queue for network protocols (LSV2/FTP/FOCAS). - Added TeamViewer support client. - Editor updates. MDC-Max Changes =============== - Fixed issue with loosing focus on event log list when time, machine, or message filter is used. - Added feature: Events given by MDC client operator panel go through DNCMaxOEMLink.dll Changes made to CIMCO DNC-Max version 7.00.38 ================================================================ 26/02/14 == - NETLink adapter: Feed hold signal fixed/tested. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.37 ================================================================ 24/02/14 == - Increase global password length from 16 to 256 chars. - Added support for hand-held terminal for directory monitor port. - Remote request: Allow directory delimiters: '\', '/' in file names. MDC-Max Changes =============== - Added function for importing reports from a mmr configuration file. - Input field extracts value processed by advanced trigger to VAR3. - Added option to select a time range for MDC events displayed in MDC client in event log. MDC-Max Web Client Changes ========================== - Fix bug that caused the MDC server to not respond. - Minor changes to visuals. - Add service to monitor if HTTP is up. Changes made to CIMCO DNC-Max version 7.00.36 ================================================================ 20/02/14 == - Directory Monitor: Fixed problem with NC-Base integration and FTP Receive. - Editor updates. MDC-Max Changes =============== - MTConnect: * Support machine part counter. * Added option for generating CYCLE ON when machine part counter is changed. - NETLink PRO Compact adapter: Added support for Feed Hold signal. - Fixed printing of Log tables. Changes made to CIMCO DNC-Max version 7.00.35 ================================================================ 14/02/14 == - Directory Monitor: Added extra checks when transferring files using FTP. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.34 ================================================================ 10/02/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.33 ================================================================ 07/02/14 == - Added option to disable/enable file filter in CNC window. - Removed extension NC in FOCAS CNC window. - Fixed refresh of split window when a file is received by FTP client split window. - Fixed FOCAS DNC - added processing by auto receive. - Setup sheet improved, there were more same options but for different protocols but only one protocol can be active at a time. - Editor updates. MDC-Max Changes =============== - Added function ping before running HedienhainOCX + terminate OCX when machine doesn't answer on ping. - Fixed HeidenhainOCX restart when no free handle is available. - Updated HeidenhainOCX. - Added new protocol for NetlinkPro HW allowed reading MDC signals from Siemens Sinumerik 840D. - Fixed auto close default value. - Fixed problem with operator screen without any button. Changes made to CIMCO DNC-Max version 7.00.32 ================================================================ 06/02/14 == - Fixed problem with missing notification when end trigger is missing. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.31 ================================================================ 03/02/14 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.30 ================================================================ 27/01/14 == - Editor updates. - Updated MDC-Max Web client. * Fix stuck colors on live screens. * Fix black color showing as red on live screens. * Stability improvements in server component. Changes made to CIMCO DNC-Max version 7.00.29 ================================================================ 21/01/14 == - DNC-Max Server: Added option to configure FTP Server port. - Fixed issues relating to the new feature: Caching of NC-Base configuration. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.28 ================================================================ 17/01/14 == - Fixed problem with NC-Base server. Changes made to CIMCO DNC-Max version 7.00.27 ================================================================ 16/01/14 == - Added feature for caching of NC-Base server configuration, gives faster start up with slow network connections. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.26 ================================================================ 10/01/14 == - Updated Portuguese and French translation. - Updated English, French, Spanish, and German DNC-Max user guide. - Added French help for Web Clients, DNC-Max as a service and License server. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.25 ================================================================ 06/01/14 == - Fixed default file filter in split file window to see all files, even without extension. - Editor updates. MDC-Max Changes =============== - Fixed issue with reconnecting of HeidenhainOCX. - New FOCAS features - read up to 3 macros, every macro has 2 values. Changes made to CIMCO DNC-Max version 7.00.24 ================================================================ 27/12/13 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.23 ================================================================ 20/12/13 == - Editor updates. MDC-Max Changes =============== - Added auto close function for operators panels (0=deactivate, >0=time in (s)). - Fixed refresh of live pie charts running over long term period. Changes made to CIMCO DNC-Max version 7.00.22 ================================================================ 19/12/13 == - Updated Korean translation. - Directory Monitor: Directory Scan Add variable $DBFIELD1 to $DBFIELD9 from the NC-Base when Rename file mode: is set to "Use specified format". - Editor updates. Changes made to CIMCO DNC-Max version 7.00.21 ================================================================ 17/12/13 == - Updated Swedish translation. - Directory Monitor: Enabled Scan Interval to be as low as 10 seconds. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.20 ================================================================ 13/12/13 == - Updated Danish, French and English translation. - Fixed "Allow only selected extensions" under Advanced Directories. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.19 ================================================================ 10/12/13 == - Program received by DNC is not added on import queue when it is the same. - Updated Finnish translation. - Editor updates. MDC-Max Changes =============== - Fixed min/max timer values when timer goes over a period. - Fixed hanging of Heidenhain OCX3 protocol. - Fixed issue with day light savings time. - Fixed issue with loosing MDC configuration when running multiple instances. Changes made to CIMCO DNC-Max version 7.00.18 ================================================================ 04/12/13 == - Updated DNC-Max help files. - Fixed problem with help in DNC-Max Service Manager. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.17 ================================================================ 02/12/13 == - Updated Portuguese translation. - Fixed problem with configuring "Fagor 8010/8020/8025/8030" and "Farley Plasma/Laser Cut". Changes made to CIMCO DNC-Max version 7.00.16 ================================================================ 29/11/13 == - Added support for restarting MOXA W5x10A and W2x50A with password. - Editor updates. MDC-Max Web Client Changes ========================== - Make screens auto update, when the configuration changes. - Fix various bugs with status boxes. Changes made to CIMCO DNC-Max version 7.00.15 ================================================================ 26/11/13 == - Editor updates. MDC-Max Changes =============== - Added condition for the case that the timer is stopped. - Added parameter that will align max time and min time to start and end of time period if timer gets over them. - Fixed counting min and max values in tables when timer is running over period. Changes made to CIMCO DNC-Max version 7.00.14 ================================================================ 22/11/13 == - Updated Swedish translation. NC-Base Changes =============== - When copying a program, the name of the current program is added to the program name field. Changes made to CIMCO DNC-Max version 7.00.13 ================================================================ 20/11/13 == - Added feature for deleting files via FOCAS. - Added feature for browsing folders on Fanuc machine via FOCAS and deleting on local PC. - Added delete file function for FTP client protocol. - Fixed DNC FOCAS receiving files. - Added message generated by FOCAS user macro. - Added number of queued programs for deleting in FOCAS DNC transmission via split window. - Change log level from info to error when a serial transfer is cancelled due to operator inactivity. - Flag a missing end trigger as an error when manually receiving files. - Updated Swedish translation. - Editor updates. MDC-Max Changes =============== - Added feature for adjusting of title in pie charts. - Fixed issue MDC loses config file when it runs in multiple instance. - Added feature to use Fanuc Macro via FOCAS for MDC. - Improved GetdayStart function, now takes 2 param, 2dn is DayLight saving time param, default value is -1=automatic. - Fixed problem with wrong date in MDC command line. - Fixed problem with overlapped bars in MDC graph in stretch mode. NC-Base Changes =============== - Added function for ignoring files that are placed on the import queue when files are identical like a files in DB. Changes made to CIMCO DNC-Max version 7.00.12 ================================================================ 13/11/13 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.11 ================================================================ 08/11/13 == - Added file associations in Windows Vista and newer when running as a normal user. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.10 ================================================================ 06/11/13 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.09 ================================================================ 01/11/13 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.08 ================================================================ 30/10/13 == - Updated French, Italian and Polish translations. - Added FTP client with split window PC|CNC. - Added FOCAS DNC features with split window PC|CNC. - Added send translator for manual send in network monitor protocol. - Added support in Network Protocol to send and receive files with long names to the Siemens 840D control. - Editor updates. MDC-Max Changes =============== - Fixed issues with crashing MDC-Max client when closing windows. - Fixed problem with FANUC machines which do not support all FOCAS functions. - Optimized MDC client for faster start up in slower networks. - Added second title to pie charts. - Fixed formatting in live bar graph. - Added new protocol for Heidenhain Option 18 using Heidenhain DCOM object "Heidenhain OCX". - Added FN38 Heidenhain NCEVENT (similar to DPRINT), works only with Opt18. - Fixed hanging MDC client when generates a report on some computers. - Fixed hanging MDC rebuild of live screen on some computers. - Fixed issue with wrong timer values when MDC crosses over midnight. MDC-Max Web Client Changes ========================== - Apply modifications to make the web client work again in IE 9 and IE 10. - Fix a bug that prevented Mozilla Firefox from displaying the web client. - Fixed the pop-up for CSV file entry selection when the list needs to scroll. - Make pop-up csv files work with both comma and semi-colon. - Force IE to not use compatibility mode for intranet servers. Changes made to CIMCO DNC-Max version 7.00.07 ================================================================ 18/10/13 == - Updated MDC-Max Web client. - Updated Portuguese translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.06 ================================================================ 14/10/13 == - Updated MDC-Max Web client. Changes made to CIMCO DNC-Max version 7.00.05 ================================================================ 08/10/13 == - Updated MDC-Max Web client. - Updated Czech translation. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.04 ================================================================ 03/10/13 == - Updated MDC-Max Web client. - Editor updates. Changes made to CIMCO DNC-Max version 7.00.03 ================================================================ 25/09/13 == - Minor fixes to Web client configuration. Changes made to CIMCO DNC-Max version 7.00.02 ================================================================ 24/09/13 == - Updated French translation. - Added DNC-Max Web client, it allows users with a Web browser / Tablet / Smart phone to control the machines. - Added MDC-Max Web client, it allows users with a Web browser / Tablet / Smart phone to access operator screens. Changes made to CIMCO DNC-Max version 7.00.01 ================================================================ 20/09/13 == - Editor updates. Changes made to CIMCO DNC-Max version 7.00.00 ================================================================ 16/09/13 == - Editor updates. ============================================================================== CIMCO A/S ==============================================================================